A white mannequin on a white background

Fit Sample: How to Get the Fit Right Before Production

Fit is one of the main reasons customers return clothing. A T-shirt with a great print still ends up back in the box if the sleeves are too long or the body is too tight. The fit sample is where you get this right, before it costs you returns.

In this guide, we explain what a fit sample is, how to run a fit session and how to write corrections a factory understands. It is part of our guide to clothing samples.

What a Fit Sample Is

A fit sample is a test garment made to check size, shape and comfort. It is usually made in your base size, often a medium, in the final fabric or one that is very close to it. Many brands need more than one fit sample before the fit is right.

The fit sample comes after the first prototype and before the pre-production sample. Maker’s Row gives a useful overview of all apparel sample stages and the names factories use for them.

Why Fabric Matters for Fit

The same pattern can fit very differently in two fabrics. A stretchy jersey hugs the body, while a stiff twill stands away from it. Fabric can also shrink after washing.

That is why a fit sample in the wrong fabric can give you a false sense of security. Ask the factory to use the real fabric. If the final garment will be washed, wash the sample before your fit session too.

How to Run a Fit Session

Use a Real Fit Model

A garment always looks better on a hanger than on a body. Use a real person whose measurements match your base size. Ideally, use the same person for every round, so you can compare results fairly.

Test Movement

Ask the fit model to sit, stretch their arms, bend forward and walk around. Check whether the garment pulls, rides up or gaps. Comfort in motion matters as much as how it looks when standing still.

Measure and Photograph

Measure the sample flat against your tech pack and note every difference. Then photograph the fit model from the front, the side and the back. Photos make your feedback much clearer for the factory.

Beige lace dress with embroidery detail

How to Write Fit Comments

Clear comments save sample rounds. Instead of describing a feeling, describe the change in numbers. Compare these examples:

  • Not clear: “The sleeves feel too long.”
  • Clear: “Shorten the sleeve length by 2 cm, from 64 cm to 62 cm.”
  • Not clear: “The hoodie looks too tight.”
  • Clear: “Add 2 cm to the chest width and keep the shoulder width the same.”

Combine all comments into one document per round, with a photo next to each point.

From Base Size to Size Set

Once the base size fits, the factory scales the pattern to the other sizes. Our article on grading rules explains how that works. Then ask for a size set, with one piece in each size, and try them on people of different sizes. A fit that works in medium can still be off in extra small or extra large.

Use the final measurements to build an accurate size guide for your website. Good fit and clear sizing also lead to fewer returns, which makes your return and exchange policy easier to manage.

Frequently Asked Questions about Fit Samples

What is a fit sample?

A fit sample is a test garment that a factory makes to check the size, shape and comfort of a design. It is usually made in the base size and in the final fabric or a very similar one.

How many fit samples do I need?

For simple garments, one or two fit samples is common. More technical garments, like activewear, often need more rounds.

What size should a fit sample be?

Most brands use their base size, often a medium. Once that fits, the factory makes a size set with one piece in every size.

Should a fit sample be made in the final fabric?

Ideally, yes. Different fabrics stretch, drape and shrink differently, so a fit sample in another fabric can give misleading results.

What is a fit session?

A fit session is when a real person tries on the sample while you check the fit, test movement, measure the garment and take photos for your feedback.

How do I give fit comments to a factory?

Describe every change in exact measurements, such as shortening the sleeve by 2 cm, and add a photo for each point in one document per round.

Similar Posts